RGB LED Controller

LED Controller, RGB LED Controller: 1. 2 years warranty 2. We have in stock 3. CE & ROHS 4. 12V or 24V

LED Controller, RGB LED Controller 

Wireless Programmable Controller has programming function and power-down memory function, and a lot of built-in programs in it to let you choose ,it controls 3 channels load change of LED, meanwhile,you could adjust all kinds of dynamic lighting changes by RF remote controller.It is very useful for light box advertising,stage setting,house decorating and so on.

Technical Parameters

1. Working temperature: -20-60°C

2. Supply voltage: DC5V,12V, 18V,24V optional(specify the required voltage on order form)

3. Output:3 channels

4. Connection mode: common anode

5. External dimension: L94ΧW58ΧH26 mm

6. Packing size: L145ΧW95ΧH50 mm

7. Net weight: 130g

8. Gross weight: 155g

9. Output current: <4A(each channel)

10. Output power: 144W

Direction for use

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2. There are six keys on the remote controller panel,the function of each key as follows:

    MODE: Mode button, a total of 10 models;

    ON / OFF: switch button;

      B +: to enhance the overall brightness, a total of 10 steps;

      B -: to lower the overall brightness, a total of 10 steps;

      S +: to increase the rate of changes,  a total of 10 steps ( its cycle from 5 seconds to 1 hour);

      S -: to reduce the rate of changes, a total of 10 steps.

3. A total of 10 keys on the controller panel , function keys are as follows:

STEP ↑: to check the last step ;

         STEP ↓: to check the next step;

         PARA ↑: up to choose the parameters;

         PARA ↓: down to choose the parameters;

      VALUE +: every time the value of corresponding parameter increase one class, hold down

the button, fast numerical increase;

         VALUE -: every time the value of corresponding parameter reduce one class, hold down the

button, fast numerical decline;

         DELETE: to remove the current step;

INSERT: Insert steps (after the current step);

      ADD: to increase steps(add in the final), the largest increase 20 steps;

      PLAY / PAUSE: Play / Pause (playing from the current steps, when programming, player must be suspended).

4. Controller’s standard built-in modes of change are shown in the table below:

No	Functions	Remarks
1	Static white	Brightness is valid,Speed is invalid
2	Static red	Brightness is valid,Speed is invalid
3	Static green	Brightness is valid,Speed is invalid
4	Static blue	Brightness is valid,Speed is invalid
5	Static cyan	Brightness is valid,Speed is invalid
6	Static purple	Brightness is valid,Speed is invalid
7	Static yellow	Brightness is valid,Speed is invalid
8	Sevev-color gradual changing	Brightness is valid,Speed is invalid
9	Seven-color jumpy changing	Brightness is valid,Speed is invalid
10	The content of programming	Brightness and Speed are invalid. User Defined

RGB LED Controller